Twin Disk Clutch Installation Kit for the Porsche® 928
Everything you need to make your Twin Disk clutch install go smooth.
Includes:
- New Grade 10.5 Hardened Pressure-plate to Flywheel bolts
- 3 Pressure Plate spring clips for stock Pressure Plates
- 3 Starter bolts for 928M High-Clamping force Pressure Plates
Use the 3 special shims to remove the pre-load from stock clutches on the workbench - then the installation of your twin-disk clutch will go much easier.
On high-clamping force modified clutches (like the ones we sell), use the special red-top bolts supplied to start your pressure plate on the flywheel, they will pull the pressure plate in far enough where you can get the regular bolts started.
The 6 Grade 10.5 metric bolts supplied are the finest and strongest available and will ensure proper torque and fitment.
Click to Enlarge
|
