|
Rebuilt Porsche Fuel Lines
Rebuild Cracked, Aged and Dangerous High Pressure Fuel Lines
Application: Porsche 928 all
Description: This is a SERVICE. You are not buying a PART. Send us your High-pressure fuel lines from your Porsche and we can rebuild them with new 350 psi fuel line and swaged fittings. Price below is per hose we rebuild for you. Turn-around time is less than 3 days excluding shipping.
Where you made need this service
- If you have an early K-Jet (CIS) fuel system (1978 - 1983) - the fuel supply lines at the firewall, and possibly at the rear of the car into the Fuel Accumulator.
- If you have an L-Jet fuel system (1981-1984)- the lines between the fuel dampers and fuel regulator (shown) at front and rear of the motor, and the fuel supply lines at the firewall.
- If you have a LH-Jetronic Fuel System (1985-1995) the lines between the fuel dampers and fuel regulator (shown) at front and rear of the motor.
- If you have added a adjustable fuel pressure regulator to your car, or a FMU, or your rubber lines are old and cracked.
The is an excellent alternative for those fuel lines that are no longer available from Porsche. Also works on similar lines found on BMW, AUDI, and Mercedes-Benz with swaged fittings.
Instructions After purchasing: Carefully remove the old fuel line from your Porsche. Dry it out or blow out any fuel inside. Bag it in a ziploc bag. Ship it to: 928 Motorsports LLC, 604 E Maple St, Horicon, WI 53032. Include your return mailing address. We will rebuild it and re-ship it to you within 3 business days.
Price Adjustment Price listed is for a typical Porsche fuel line about 12" long with two end fittings. If you send us a longer hose to rebuild, there may be a small price adjustment. Multiple hoses can be shipped at same time, price will be adjusted accordingly.
Fuel System Precautions High Pressure Fuel Lines should only be installed by a qualified mechanic, and ALWAYS CHECKED FOR LEAKS before the vehicle is put in service. |