Check All That Apply
Item
Description
Quantity
Price
Porsche® 928 block
Used Porsche® 928 5.0 liter engine block for core
1
$750.00
Dynamic Balancing
Rotating assembly spin-balanced as an assembly
1
$160.00
Static Balancing
Piston, wrist pins and rods weight-matched to .1 gram
1
$440.00
Head Stud Fasteners
New High-strength nuts for the Head studs
Set
$20.00
Lower Engine Fasteners
New High-strength nuts for the crankcase and bearing bosses
Set
$98.00
Head Studs
High-strength head studs to replace the stock head bolts
Set
$337.00
Piston Rings
Total Seal Piston rings to 928MS spec for the engine
Set
$235.00
Pistons
Custom 928MS forged pistons, designed for SC use, ceramic-coated crowns and graphite-impregnated skirts. 8.5:1 CR
8
$2,200.00
Bearings
Matching bearings for the custom crank and connecting rords
Set
$335.00
Connecting Rods
Custom 928MS connecting rods, manufactured from Timken 4340 alloy, 850 HP spec, high-strength rod bolt upgrade
8
$1,825.00
Crankshaft options - RJL
Rod Journal lightening
1
$150.00
Crankshaft options - KE
Knife-edge the counterweights
1
$200.00
Stroker Crankshaft
Steel 4340 alloy billet crankshaft. Shot-peened, magnafluxed, straightened and polished, with improved oiling passageways
1
$2,945.00
Block boring and sleeving
Bore 928 block and sleeve it with high-ductile T-Top iron sleeves to 4.125" bore
1
$2,845.00
Assembly
Assemble Short Block engine
1
$1,450.00
HEADS/VALVES
Check All That Apply
Item
Description
Quantity
Price
Retainers
928MS custom bead-lok valve spring retainers, Titanium
32
$426.00
Springs
Matched set of dual valve springs, all springs tested and selected to within 5% of spec or less
32
$675.00
Used Heads
Pair of used 32v heads for core. Not needed if customer supplies their own heads to be rebuilt.
Pair
$800.00
Valve Job - Standard
Complete valve job, seals, and surface milling. Standard valves, standard seats. Replacement of valves or seats extra and as needed.
32
$650.00
Valve Job - Large Valve Upgrade
Complete valve job, new valve seats installed and milled for large-valve upgrade, seals, all new guides, and surface milling.
32
$1,250.00
Valves - SS
928MS custom Stainless Steel valves, 39mm intakes with upgraded 7mm shafts, 33mm exhaust valves
32
$960.00
Ported Heads - 16V
Hand-porting, polishing and port-matching 16v heads for optimum flow. Includes surface milling, and seat milling.
Pair
$850.00
Ported Heads - 32V
Porting of the 32v heads for optimum flow. Includes surface milling, and seat milling for over-sized valve seats
Pair
$1,800.00
CAMSHAFT
Check All That Apply
Item
Description
Quantity
Price
Camshafts 928MS 32vS2
Custom camshaft set, Intake lift duration .428/214 Exhaust .389/206
Set
$1,960.00
Camshaft Cores
Used camshafts for cores, 4 at $125 each
4
$500.00
Followers
Set of new hydraulic followers, $55 each
32
$2,080.00
Timing Belt
HTD Timing belt
1
$149.00
Tensioner
Rebuilt tensioner
1
$389.00
Tensioner Arm
New bushings, bearings and rollers for the belt assembly
Set
$345.00
OILING
Check All That Apply
Item
Description
Quantity
Price
Oil Pump
Original 928 oil pump, inspected, with new seals
1
$418.00
Scraper and Tray
928MS crankshaft scraper system and windage tray
1
$689.00
Stud Kit
Custom oil pan stud kit
1
$49.00
Custom Gasket
Custom oil pan gasket for supercharged applications
1
$48.00
MISCELLANEOUS
Check All That Apply
Item
Description
Quantity
Price
Head Gaskets
3-layered steel head gaskets, custom bore dimension
Set
$185.00
Gasket Set
Porsche® Complete Engine Gasket Set, less Head Gaskets
Set
$625.00
Water Pump - Rebuilt
Remanufactured water pump
1
$219.00
Thermostat
New Thermostat
1
$19.00
Assembly
Assemble Heads on Block, Cams, Timing Belt and Tensioner
1
$1,240.00
Warranty
Remanufactured Engine Limited Warranty
1
Included
OPTIONS
Check All That Apply
Item
Description
Quantity
Price
Dyno
Break in and test engine on engine dynometer before shipment
1
$850.00
Powder Coating
Powder-coat intake manifold and camshaft covers. Includes disassembly, bead blasting, baked-on painting (customer selects the color), re-assembly
1
$650.00
