|
These parts fit the Powerdyne BD-600, BD-10, BD-11, BD-11a
The 928 Motorsports LLC Bearings: We are the original developer of the high-speed bearing for the Powerdyne Supercharger. Working with engineers at several bearings manufacturers, we have come up with the right hi-temp grease, the right bearings, and the right alloy inner and outer races to get up to 50,000 rpm out of these bearings where they had been previously limited to 36,000 rpm.
928 Motorsports LLC is the only manufacturer of these high speed bearings for the Powerdyne supercharger in the World. The lubricant inside these bearings will tolerate up to 550 degrees F without failure - over 250 degrees more than the standard bearings. Be wary of others "high speed" or "ceramic" bearings - they are not as good as ours!
The 928 Motorsports LLC Belt: We improved on the original belt, too. Raising the impeller speed to 50,000 rpm from 36,000 rpm (stock) requires a tougher belt. Kevlar is a step in the right direction, but its not enough. You also need stronger roots on the cogged teeth or the backlash when shifting will rip the teeth off the belt! The 928 Motorsports Competition belt is the top belt in this application - bar none. Over 3 times tougher than the Gates "GT" belt that others sell.
Kit Includes:
- 2 custom high speed bearings for impeller shaft
- 2 standard steel bearings for the drive shaft
- 1 custom 928 Motorsports Competition belt
$10 COUPON INCLUDED:
We include a coupon for $10 off in every Powerdyne Rebuild kit we sell. Use it towards impeller resurfacing if you need to, or Venting and Shimming, or even a complete rebuild if you change your mind and decide not to do it yourself! To see all our Powerdyne Parts, CLICK HERE
To see all our Powerdyne Repair\Rebuild Services, CLICK HERE
|
