Design Objectives of the Kit : No previous supercharger kit for the 968 allowed the air conditioning to remain on the car. This kit was designed to achieve that and the following design objectives:

• low boost (and no special head gaskets)
• use the stock injectors and ECU (no chip needed)
• keep the Air Conditioning
• ease of installation
• low cost

The Results: Our 968 kit will install in a single Saturday afternoon by the common mechanic. No engine disassembly or special preparation needed. Drive into your garage stock, and drive out 6-7 hours later with an additional 60 to 70 HP.

Simple Installation: Our kits come with everything you need to do the complete installation. And, because the Raptor V supercharger used in these kits is self-contained - with permanently lubricated bearings - the need for oil lines to and from the engine is eliminated. Typical installation time: 6-7 hours complete!

Top Technology! The 928 Motorsports Supercharger kit for the Porsche® 968 will provide more horsepower and torque and do it efficiently, reliably and quietly with no loss of drivability or daily ease of operation. You will substantially increase your 968's acceleration and fun-factor! This rugged supercharger's precision construction and the exclusive ceramic-coated impeller assures full high speed performance at all RPM's along with outstanding reliability and quiet operation. No special care or maintenance is needed.

Dyno-proven Results: This Supercharger kit installed on a 1994 Porsche® 968 with manual transmission (photos below) produced 254 HP at the tire and 292 HP at the engine, up from the stock numbers of 187 HP at the tire and 215 HP at the engine. A gain of 67 HP! We did this at less than 5 pounds of boost for a nice, safe installation with no need to change head gaskets.

Some Features:

• Designed to allow your Air Conditioning to remain in place and function.
• Does not require oil lines running to/from your supercharger; simplifies installation and reduces oil leaks.
• Does not require removal of the intake manifold or fuel system to install.
• Use the stock injectors and ECU. No changes.
• Does not require removal of the timing belt cover(s) to install.
• Complete kit has been Dyno-tuned and tested, safe for your motor.
• Complete kit includes every part you need and detailed instructions.
• Designed to be installed by the average mechanic/or owner in under 8 hours.
• Tech Support provided toll-free at 877-FOR-928M
• Uses the advanced and highly-efficient Raptor supercharger.
• The only centrifugal supercharger machined from billet, not castings.
• The only centrifugal supercharger with a ceramic-coated impeller for greater adiabatic efficiency.

Complete Kit: In addition to the Supercharger, brackets, all hardware, and tubing specific to your vehicle, 928 Motorsports also provides you with:

• 928 Motorsports Cold Air Intake System with K&N Filter
• 928 Motorsports Intake Elbow to MAF System
• 928 Motorsports Supercharger Mounting brackets
• 928M Bosch Blow-off Valve
• Idler/Tensioner Pulley Assembly
• A complete, shrouded High Output Radiator Fan
• All required silicone hoses and elbows
• All required tubing and clamps
• All required metric hardware
• Excellent Assembly Instructions and Tech Support

Download the Installation Manual and See for Yourself! Many answers to your questions can be had by having a look at the quality of our Installation Instructions.

Warranty: These are factory NEW kits and are warranted direct to you. The Limited Warranty covers any and all defects in workmanship and material, regardless of mileage incurred during the warranty period.